Personalize your stock!
This page gives an overview of our most common customization options in four different categories. For each rifle stock model there will be a configurator where you can find this options. The configurator for the FClass-Open model is available. You can find it here. Others will follow soon. This page helps you visualise the options for better understanding. Note that it depends on the rifle stock model which options are available.
Our unique design and production concept makes this possible. Only with Wood2Stock!
Select an option, drag the handle and see the option visualized!
Forend
For bi-pod connection we use a short Anschutz rail. We also make a picatinny bi-pod adapter which fits into the Anschutz rail slot. A small picatinny piece can be installed on the adapter to connect a picatinny bi-pod. Drag the handle to show the option.
Shooting an FClass rifle from an bi-pod might become handy when the front rest needs to stay at home or is not available. We integrated an Anschutz rail in the forend bottom. When shot with Harris bi-pods you need an Sinclair bi-pod adapter which fits into the slot. We also make a picatinny bi-pod adapter which fits into the Anschutz rail. Drag the handle to show the option.
For the FClass and BR50 model we can support a flat forend if this is required. Drag the handle to show the option.
The air vents are nicely slotted in the front of the forend and are mostly there for optical reasons. The airvents give your stock a different look. Drag the handle to show the option.
We offer weight saving pockets in the forend for the FClass-Open and FTR models. This might be usefull when the rifle build is getting close to the FClass-Open or FTR weight limit. We also offer this in combination with a rain drain. Drag the handle to show the option.
The rain drain helps to get rid of water under the barrel during a rain shoot. Possible rain water can exit the barrel channel through a small hole. This option is only available with the weight saving pockets. Drag the handle to show the option.
For smallbore actions with smaller diameters it is possible to make the action area somewhat sleeker. This will give the stock a nicer look with the action. Drag the handle to show the option.
We work with different standard diameters of straight barrel channel diameters depending on type of firearm and barrel shanks. It is also possitble to have a custom straight barrel channel inlet or leave the barrel channel inlet out. Drag the handle to show the option.
Butt Style
With this option you get an angle of 1.5 degrees on the bottom of the butt instead of the standard flat benchrest style butt. This may be desirable when rear bag also has an angle or when slight elevation adjustments are needed during shooting. Note that due to the 1.5 degrees cut, the width of the flat part is not constant along the lenght. Drag the handle to show the option.
When the rifle needs to be controlled by the non-shooting hand, a short cut out becomes handy. The cut-out leaves enough length for placing the butt in a rear bag. Drag the handle to show the option.
For most of our models we can integrate a butt heigt extender into the stock. This can work with rearbag depending on the stitch with and ear heights (the thumbwheel might interfere). It is mostly used when adjustment of the bi-pod are to course for precision hight adjustment in precision shooting. This thumbweel adjustable extender, makes it possible to raise the butt with maximum 25mm (1″). Drag the handle to show the option.
Buttplate & Cheekpiece
The standard fixed buttplate system can be replaced with our adjustable buttplate system. With this system the LOP range is from standard 360mm to 400mm. This option changes the shape of the butt to a different design. Note that the fixed buttplate system can be extended with additional spacers to increase the LOP. Drag the handle to show the option.
The standard adjustable buttplate system can be replaced by a lightweight adjustable buttplate system. The lightweight system weights +/- 250 gram (8.8 oz) compared to the +/- 550 grams (19.4 oz) of the standard adjustable buttplate system. Drag the handle to show the option.
We can integrate an adjustable cheekpiece with thumbwheel into the stock. This mechanism has a magnet. With the magnet the cheekpiece can be pulled off the system leaving the height untouched. Drag the handle to show the option.
Dimensions & Angles
All our stocks have a standard, mostly different OAL. For example the FClass-Open is standard 880mm and the FTR 960mm. Depending on the model this OAL can be lengthened or shortened. Note that by changing the OAL the given LOP will not change, so a change in OAL will change the forend lenght.
The LOP (standard set to approx. 360mm) of stocks with a fixed buttplate and action inlet can adjusted by leaving the stock end longer of shorter. How much the LOP can be changed depends on if there is an adjustable cheekpiece. Stocks without an adjustable cheekpiece can be shortened more compared to stocks with an adjustable cheekpiece. Technically we can also support change of LOP with an adjustable buttplate. For example when the LOP of the maximum 400mm is not enough. In that case we can leave the stock also longer. Be aware that a change in LOP will effect the length of the forend because the OAL stays the same. To compensate this, you can choose to lenghten the OAL.
This option gives you the possibility to choose a custom width for your rear bag to match the stitch size of your rear bag. The full range between 12mm and 20mm is only available with a fixed buttplate or the lightweight adjustable buttplate system. For the standard adjustable buttplate system you can choose for a 12mm width instead of the standard 16mm width. Drag the handle to show the option.
